Bilstein front shock for 64-66 Mustang - Street valving
Vintage Mustang specific custom tuned Street valving is ideal for spring rates up to 600lbs. Recommended for street driven vehicles.
Sold individually - you will need qty. 2 per car.
Of all a vehicle's suspension components, nothing works harder than the shock absorbers, making it critical to pick the right one. Bilstein Shock Absorbers are the least expensive, fastest way, to dramatically improve the ride, handling and control of a vehicle.
Digressive Working Piston Assembly
The piston head design allows independent tuning of the compression and rebound damping forces to provide optimum ride comfort and performance without compromise. It features fewer parts than most conventional twin tube and so call "adjustable" shock designs. This simple, yet exceptional functional digressive design contributes to the extreme durability and long life of Bilstein Shock Absorbers.
The photo below dramatically illustrates the size difference between the working piston inside a Bilstein monotube shock and one found in a typical "twin tube" shock. Mono Tube versus Twin Tube The Bilstein has a 228% larger surface than the average conventional twin tube piston offering greater sensitivity and superior vehicle control. |
- Vintage Mustang specific custom tuned Street valving is ideal for spring rates up to 600lbs. Recommended for street driven vehicles.
- The Ultimate in Comfort & Control.
- Direct Bolt-In.
- Works on lowered applications.
- Mono Tube Design, means a much larger working piston diameter.
- Seamless Tube by a special extrusion method.
- Deflective Disc Valving.
- Split compression and rebound valving, to soften the ride and control the bounce.
- Hard Chromed Piston Rod
- No springs or check valves to wear out
- Mono Tube Design allows the excessive heat from the oil to dissipate more quickly.
- Separated dividing piston holds pressure on the oil to prevent aeration (foaming) that leads to performance loss.
- The last shock, you will ever have to buy.
- Limited Lifetime Warranty.
Sold individually - you will need qty. 2 per car.
-
Peter E.Hey guys,
Just letting you know that we fitted the Bilstein shock absorbers that I got from you plus new springs to my 1965 coupe last week & the difference in handling is nothing short of bloody amazing. It is a whole different car to drive & handles like there is no tomorrow. Thank you for your advice & service & hopefully, when I finally get my other car (1966 convertible) back on the road, I will get another set from you for it also.
Many thanks,
Peter
Related products
-
Shelby Drop Control Arm Lowering Jig 65-66 Mustang
SOT-DRILLJIG-65-66-
Free shipping - US Lower 48 Only
-
-
Shelby Drop Control Arm Lowering Jig 65-66 Mustang
SOT-DRILLJIG-65-66-
Free shipping - US Lower 48 Only
-