Unisteer power rack & pinion for late 67-70 Mustang
This Mustang rack and pinion kit greatly improves handling, responsiveness and steering effort.
This Mustang rack and pinion kit greatly improves handling, responsiveness and steering effort. The custom steering gear is engineered to match the stock Mustang suspension. Installation is simple!
The rack and pinion is mounted to a heavy gauge section of angle iron that replaces the stock tubular cross member. This ensures the chassis loads are still supported and the rack doesn't carry the chassis loads AND the steering loads. Other systems available don't have this feature that can lead to increased internal component wear.
Includes:
- Rack & Pinion
- Steering shaft kit
- Pump kit
- Mounting hardware
Tech Info:
- Pinion Type/Size: 17mm DD
- Amount of Travel: 6"
- Turns Lock to Lock: 2.5 - 2.75 Turns
- Pressure Port Size: 18mm - 6 AN
- Return Port Size: 16mm - 8AN
- Pump Required: Low Flow 1100 psi
- Inner End Threads: 9/16" - 18
Compatible with Street or Track's front coilover system and brake systems. We can also supply this rack & pinion along with a Ididit steering column for a complete steering solution! Also available less power steering pump, pulley and lines if you are using a pulley/pump kit from March etc. If so, the rack will need 3 to 3.5 gallons per minute of flow from the pump you use. If you want to order the rack this way or have questions just let us know!
Using a March pulley system? Order this kit minus the pulley. You'll need to know that the Unisteer pump is a Gen II-TC pump and has a .661" diameter (17mm) shaft and no keyway.
Related products
-
1965-73 Mustang front & rear coilover system & conventional rear end housing
SOT-PACKAGE2-CRE-
5% less
-