Unisteer power rack & pinion for 68-69 Torino small block
This rack and pinion kit greatly improves handling, responsiveness and steering effort.
This rack and pinion kit greatly improves handling, responsiveness and steering effort. The custom steering gear is engineered to match the stock suspension. Installation is simple!
The rack and pinion is mounted to a heavy gauge section of angle iron that replaces the stock tubular cross member. This ensures the chassis loads are still supported and the rack doesn't carry the chassis loads AND the steering loads. Other systems available don't have this feature that can lead to increased internal component wear.
Includes:
- Rack & Pinion
- Outer tie rod ends
- Steering shaft kit
- Pump kit
- Mounting hardware
Tech Info:
- Pinion Type/Size: 17mm DD
- Amount of Travel: 6"
- Turns Lock to Lock: 2.5 - 2.75 Turns
- Pressure Port Size: 18mm - 6AN Banjo (Lower)
- Return Port Size: 16mm - 6AN Banjo (Upper)
- Pump Required: Low Flow / Pressure
- Inner End Threads: 9/16" - 18
Compatible with Street or Track's front coilover system and brake systems. We can also supply this rack & pinion along with a Ididit steering column for a complete steering solution! Also available less power steering pump, pulley and lines if you are using a pulley/pump kit from March etc. If so, the rack will need 3 to 3.5 gallons per minute of flow from the pump you use. If you want to order the rack this way or have questions just let us know!