Unisteer power rack & pinion for 65-66 Mustang w/big block
This Mustang rack and pinion kit greatly improves handling, responsiveness and steering effort.
This Mustang rack and pinion kit greatly improves handling, responsiveness and steering effort. The custom steering gear is engineered to match the stock Mustang suspension. Installation is simple!
The rack and pinion is mounted to a heavy gauge section of angle iron that replaces the stock tubular cross member. This ensures the chassis loads are still supported and the rack doesn't carry the chassis loads AND the steering loads. Other systems available don't have this feature that can lead to increased internal component wear.
- Rack & Pinion
- Outer tie rod ends
- Steering shaft kit
- Pump kit
- Mounting hardware
Compatible with Street or Track's front coilover system and brake systems. We can also supply this rack & pinion along with a Ididit steering column for a complete steering solution! Also available less power steering pump, pulley and lines if you are using a pulley/pump kit from March etc. If so, the rack will need 3 to 3.5 gallons per minute of flow from the pump you use. If you want to order the rack this way or have questions just let us know!
Using a March pulley system? Order this kit minus the pulley. You'll need to know that the Unisteer pump is a Gen II-TC pump and has a .661" diameter (17mm) shaft and no keyway.
Unisteer power rack & pinion for 65-66 MustangUNI-8010890-01
Free shipping - US Lower 48 Only
Baer Tracker Bump Steer Kit for 1965-66 Ford Mustangs-3261001BAE-3261001