Unisteer manual rack & pinion for 1960-65 Ford Falcon & Comet
This rack and pinion kit greatly improves handling, responsiveness and steering effort.
This rack and pinion kit greatly improves handling, responsiveness and steering effort. The custom steering gear is engineered to match the stock suspension. Installation is simple!
The rack and pinion is mounted to a heavy gauge section of angle iron that replaces the stock tubular cross member. This ensures the chassis loads are still supported and the rack doesn't carry the chassis loads AND the steering loads. Other systems available don't have this feature that can lead to increased internal component wear.
- Rack & Pinion
- Outer tie rod ends
- Steering shaft kit
- Mounting hardware
Compatible with Street or Track's front coilover system and brake systems. We can also supply this rack & pinion along with a Ididit steering column for a complete steering solution! Also available less power steering pump, pulley and lines if you are using a pulley/pump kit from March etc. If so, the rack will need 3 to 3.5 gallons per minute of flow from the pump you use. If you want to order the rack this way or have questions just let us know!
Quick Release Monte Carlo Bar - FalconSOT-QRSTB-L
1965-66 Mustang Billet Shock Tower CapsSCD-C5ZZ-18A017-BL
Lower Control Arm Camber Kit for 67-73 MustangsSOT-LCACK67-73
Shelby Drop Control Arm Lowering Jig 67-70 MustangSOT-DRILLJIG-67-70
Free shipping - US Lower 48 Only
Stainless Braided Brake Hose Kit for 65-66 Mustangs with Kelsey Hayes calipersSOT-KHBH6566
Street or Track Adjustable Strut RodsSOT-STSR
Roller Idler Arm, Manual Steering - 1967-70 Mustang/CougarORP-1034