Power brake conversion for 1964-66 manual Mustang with disc brakes
This setup utilizes a new American made Bendix power brake booster with increased sensitivity and a 5 year warranty.
The safety and increased stopping power you have been looking for on any 1964 - 1970 Mustang in a very easy to install unit. This setup utilizes a new American made Bendix power brake booster with increased sensitivity and a 5 year warranty,* new large capacity dual chamber master cylinder, specially designed mounting bracket to allow direct bolt in while retaining original brake pedal assembly and clearance of the shock tower. The push rod is preset but is adjustable to move the pedal height up or down. The only modification necessary is bending new lines from the master cylinder to the distribution block. We also offer a rebuilt distribution block part number C7ZZ-2B257-A which is not included in the Power Brake Conversion. Note: Booster requires a minimum 15 pounds of engine vacuum pressure at idle for maximum stopping power. Some high performance high lift camshafts may not create enough vacuum. Stock engine vacuum pressure is 18 pounds. *5 year warranty on Booster only. 1 year warranty on Master Cylinder. Requires notching of stock shock tower brace. Export brace recommended.