Aluminum Dual Pass Radiator 19" x 28"
Dual pass radiators circulate coolant across the top half of the radiator, then back across the bottom half allowing up to twice the heat dissipation.
Dual pass radiators circulate coolant across the top half of the radiator, then back across the bottom half allowing up to twice the heat dissipation. These radiators feature furnace brazed tanks, two rows of 1" tubes, billet machined filler neck with overflow and a standard 1-3/4" outlet. The universal inlet design accepts 1-1/2" standard hose, -16 or -20AN fittings (sold separately).
Pictured below installed in our 66 Mustang. Stock battery tray will need to be removed or reconfigured. Also the lower outlet may need to be cut off and re-angled. On our 66 we did this to allow the hose a better routing ($25 at our local Tig welding fab shop). The bottom hose was an off the shelf piece from our local parts supply store, the top hose is two 90 degree elbows joined in the middle with a nipple.
Fan is a 2360cfm Spal straight blade puller.
Billet Export Brace - MustangSOT-EXPORT
Quick Release Monte Carlo Bar - MustangSOT-QRSTB
Spal 185 degree thermostat, relay & wiring kitSPA-185FH
Street or Track Adjustable Strut RodsSOT-STSR
Spal 16" straight blade high performance puller fanSPA-30102120