Home
Shopping Cart
Contact Us


 


       Home Policies
   Contact us     About us   

        Recover password    FAQ





 

 Categories 
  Street or Track Products

  Air & Fuel

  Apparel

  Brakes

  Chassis

  Cooling

  Door Parts

  Electrical

  Engine

  Exhaust

  Grille

  Interior

  Oil System

  Safety

  Sheet Metal

  Steering

  Suspension

  Tools & Accessories

  Transmission & Drivetrain

  Wheels & Accessories

 


 Bestsellers 
  1. Street or Track Watts Link
  2. Fays2 Watts Link for 1979-04 FOX & SN95 Mustangs
  3. Fays2 Watts Link for 82-02 F-Body
 


 Special 
  Gift certificates
 


 Other Stuff 
  Recover password
  Contact us
  Privacy statement
  Policies
  Site map
  Customer Cars
  Street or Track Adjustable Strut Rods - installed pictures
  Stealth BOSS 302 Coilover Installation
  Brake System Quick Guide
  Fuel Cell Plumbing
  Installing convertible rockers into a 65-68
  Relocating inner wheel arches

 
  Street or Track LLC :: Suspension :: Rear Suspension :: Watts Link :: Fays2 Watts Link for 1979-04 FOX & SN95 Mustangs

Fays2 Watts Link for 1979-04 FOX & SN95 Mustangs
Fays2 Watts Link for 1979-04 FOX & SN95 Mustangs 

New for the Fox Body/SN95!

Start driving a better handling Fox Body/SN95 with a FAY'S2 Suspension Watts Link. Based on the same suspension technology the factories used in the Trans Am wars from 1968 through today and used in all professional road racing series around the globe. Uses factory mounting points plus some drilling. NO welding or cutting! Accommodates factory over the axle exhaust systems! All our Watts Links use .120 wall square tubing, grade 8 and 5 hardware, and chrome-moly rod ends with a 25,000 pound lateral load. We may be a pound or two heavier than some manufacturers would build a Watts Link but we build to withstand the track AND the much more demanding street use. We will not compromise on quality or strength!

FAYS2 Fox Body/SN95 Watts Link protoype viewed from the rear.

FAYS2 Fox Body/SN95 Watts Link passenger side axle clamp is 6 inches wide and .125 inches thick and uses .5 inch grade 8 bolts.

FAYS2 Fox Body/SN95 Watts Link drivers side axle clamp is 3 inches wide and .125 inches thick and uses .4375 inch grade 8 bolts.

FAYS2 Fox Body/SN95 Watts Link prototype close-up viewed from the rear.

FAYS2 Fox Body/SN95 Watts Link prototype installed on a 1998 viewed from the rear.

FAYS2 Fox Body/SN95 Watts Link prototype installed on a 1998 viewed from below showing 2.5 inch factory style exhaust.

FAYS2 Fox Body/SN95 Watts Link prototype viewed from the rear with aftermarket fuel cell. In this photo the after market fuel pump has not been remounted.

The above three photos show the passengers side axle clamp. This clamp will be angled down at approximately 120 degrees.

This photo shows the drivers side frame rail plate attached using the existing quad shock bolts. The quad shock plate will re-mount over this plate using the factory bolts. The installer is drilling the .5 /.375 inch hole behind the factory shock. If your car does not have factory quad shocks you will be supplied additional shoulder bolts and instructions to drill the four holes not provided by the factory.

This shot shows the sway bar relocation bracket which relocates the sway bar down and forward. This bracket will vary depending on your year of car. The final production bracket will be cut on an angle per the red line in the photo.

This photo shows the sway bar located down and forward to clear the watts propeller.

Details
 
Part Number: FAY-10079
Price: $695.00

Options
 
Quantity

 Add to cart 
        

Product rating
Product rating

Voting

 


 

 

 Search 
      
Advanced search    

 


 Your cart 
Cart is empty
  View cart
  Checkout
 


 Authentication 
Username

Password

            Log in
            Register

 




Copyright © 2003-2019 Street or Track LLC