This spindle kit is a major upgrade to the weak 65-69 Mustang and similar
Ford spindles. Think about it. The original cars were designed for
bias ply tires that didn't grip very well. Now, we are using modern radial
tires with lots more grip. The early spindles are prone to breaking under harsh
driving conditions with sticky tires. If you are serious about road
racing, open tracking, building a corner carving street machine or lifting the
front wheels drag racing, you should upgrade your early spindles.
This kit includes:
- 1 Pair of heavy duty spindles. Machine gray powder coated for long
lasting corrosion protection.
- Set of big inner and outer Timken bearings and races.
- Timken inner dust seals.
- Spindle nut kit - keyed washers, nuts, nut retainers, cotter pins and dust
- Dust caps - replace those smashed in ones!
- Outer Tie Rods.
Note: Factory power steering 65-66 cars will
require 1 x ST-TR.3 & 1 x ST-ES445RL outer tie rods. Factory manual steer
65-66 cars and 67-73 factory manual or power will require 2 x ST-ES445RL outer
tie rods. Please look in the 'Related Items' section below to add these to
your shopping cart.
If you are purchasing these spindles with one of our brake system you do not need the
bearings/seals etc. shown above
as these will be included (unless you want spares).
Don't let this happen to you:
This happened at a track event we attended in the run group
before ours. Car was running small spindles with big sticky tires.
Wheel folded into the fender and the cars frame rail gouged a deep, long gash in the